How to Design and Build a Backyard BBQ Pit Clone

Designing and building a backyard BBQ pit clone can be a fun and rewarding project for those who enjoy outdoor cooking. Here are the general steps you can follow:

Gather Materials and Tools First, you’ll need to gather all the materials and tools required for the project. Materials will include bricks, concrete blocks, mortar, and metal grates. Tools will include a shovel, trowel, level, masonry saw, and a hammer.
Plan the Location Choose a location for your BBQ pit that is away from any combustible structures, and will not interfere with any underground utilities. Make sure the location is level and allows for proper drainage.
Build the Base Lay a foundation of concrete blocks or bricks to create the base of your BBQ pit. Make sure the base is level and stable. If you want to build a larger pit, you may need to dig a shallow pit and pour a concrete foundation.
Build the Walls Using bricks or concrete blocks, build the walls of your BBQ pit to the desired height. The walls should be at least 2 feet high to allow for proper air flow and heat retention. Leave an opening for the firebox, which will be used to start the fire.
Create the Firebox Using bricks or concrete blocks, create the firebox by laying them in a U-shape at one end of the BBQ pit. The firebox should be about 12-18 inches deep and wide, and about the same height as the walls.
Install the Grates Once the walls and firebox are complete, install the metal grates that will hold your food. The grates should be placed about 6-8 inches above the firebox to allow for proper heat distribution.
Add Finishing Touches Add any finishing touches to your BBQ pit, such as a chimney or a cover to protect it from the elements.
Season the BBQ Pit Before using the BBQ pit, season it by lighting a small fire in the firebox and allowing it to burn for several hours. This will help to cure the mortar and remove any residual chemicals.